STC-3008 Dual Digital Temperature Controller Two Relay Output DC12V 24V AC220V Thermoregulator Thermostat with Heater Cooler(STC-3008 DC12V)

Temperature ControllersDescription:Alarm when temperature exceeds temperature limit or when sensor error.Refrigerating control output delay protection;Temperature calibration;Control temperature by setting the temperature setting value and the difference value;Switch the modes between cool and heat;Technical Parameters:Storage temperature: -30-75 CelsiusAmbient temperature: 0-60 CelsiusRelay contact capacity: Cool (10A/240VAC); Heat (10A/240VAC)Sensor: NTC sensor<;3wPower supply: 12V 24V AC 110-220VSensor error delay: 1 minuteAccuracy: 0.1 CelsiusTemperature measuring range: -55-120 CelsiusHow to restore SettingsPress the "Down 1" and "Down 2" button at the same time, the setting is restoredPress the button once to display the stop temperature. Long press the button for about 3 seconds and the stop temperature number flashes. The required temperature can be set by the up and down keysSet the stop temperature:Press the "up" button once to display the starting temperature. Long press the "up" button for about 3 seconds,The required temperature can be set by the up and down keysSet start up temperature:CodeFunctionSet RangeDefaultP0Compressor 1 delay time0-60min0minP1Compressor 2 delay time0-60min0minP2High temperature alarm value55-120 ° C120 ° CP3Low temperature alarm value55-120 ° C-55 ° CPress "Up 1" Button & Up 2Button at the same time to setting mode==========Cable Length : 1MTheory : Temperature ControllerDisplay Type : DIGITALCertification : noneModel Number : STC-3008Display Size : 1.9 Inches & UnderMax Measuring Temperature : 100°C - 119°CStyle : Standing and Wall HangingIs Smart Device : noStyle : EmbeddedPower Type : Charger

• Temperature Controllers
• STC-3008 Dual Digital Temperature Controller Two Relay Output DC12V 24V AC220V Thermoregulator Thermostat With Heater Cooler