Screw Extractor and Bolt Remover Set - 25 PC Easy Out Tool Kit for Removing Broken, Stripped, Frozen Screws and Bolts (1/8" to 7/8"), Hex Head Multi-Spline Design

Screw extractor kit is a reliable tool for removing broken or damaged screws from a piece of work without damaging the thread. The size of this easy out screw removal kit is derived from the corresponding screw and bolt size. With this 25 in 1 stripped screw extractor kit at hand, you can easily handle various damaged screw removal tasks. Step-By-Step Usage Guide 1. Check screw size: Measure the diameter of the damaged screw to determine the proper extractor size.2. Drill pilot hole: If the screw is broken below the surface, drill a pilot hole in the center of the broken screw to fit the extractor tip. 3. Insert screw extractor: Insert the extractor and make it seated STRAIGHT and FIRMLY. 4. Drive Extractor: Use a ratchet or wrench to turn the extractor counterclockwise. When you turn, the extractor begins to bite into the screw and pull it out. It might take a little bit of strength, BUT BE CAREFUL NOT TO OVERDO IT TO BREAK THE SCREW EXTRACTOR. Keep turning the extractor until the screw is completely removed. Finally, a pair of pliers is needed to pull the screw out of the drilled hole. Specifications Material: carbon steel + plastic Color: dark grayExtractor Size: 1"-7/8", 1"-27/32", 1"-13/16", 7/8"-25/32", 7/8"-3/4", 7/8"-23/32", 7/8"-11/16", 7/8"-21/32", 3/4"-5/8", 3/4"-19/32", 3/4"-9/16", 3/4"-17/32", 5/8"-1/2", 5/8"-15/32", 5/8"-7/16", 1/2"-13/32", 1/2"-3/8", 1/2"-11/32", 1/2"-5/16", 1/2"-9/32", 1/2"-1/4", 1/2"-7/32", 1/2"-3/16", 1/2"-5/32", 1/2"-1/8" Package Included 25Pcs x screw extractor 1 x plastic case

• 25 IN 1 Easy Out Screw Extractor Set: Composed of 25-piece damaged screw extractors to remove fasteners that are stripped, broken, or stuck, ranging from 1/8 in to 7/8 in (diameter) in 1/32 in increments. All ez out screw extractors are neatly seated in slots of a portable case , easy to store and carry
• Spiral Flute Design: Spiral left-hand design allows for extra gripping power and faster threading speed. This screw extractor kit excels at removing broken or frozen screws, bolts, studs, fittings, threaded pipes, and pins, saving both money and time
• Built To Last: Engineered from high-density C45E4 carbon steel, this broken bolt extractor kit is resistant to wear and impact. Chamfered bit also contributes to smoother fit onto fasteners, making the extraction process quicker and simpler
• Easy To Use: Drill a hole large enough to hold stripped screw extractor tip in center of screw. Insert the screw extractor and turn it counterclockwise with wrench or ratchet until the screw is completely removed
• Wide Application: This bolt extractor set is perfect for DIY project, furniture repair, automobile maintenance,or tackling a more complex mechanical task