R122H-AAJ First Stage Compact Regulator, Non-Adjustable 10 psig Spring, 1/4" x 1/2" NPT

Fisher Type R122H is an Underwriters Laboratories (UL) listed regulator designed for two-stage LP-gas (propane) systems. The unit is designed for use as a first-stage regulator for domestic applications, perfect for tight installations. Inlet and Outlet gauge taps allow easy system testing, even in underground tanks. The Outlet pressure set point remains at a nominal factory setting of 10 PSIG/0,69 bar. !!! WARNING !!! Failure to follow these instructions or to properly install and maintain this equipment could result in an explosion and/or fire causing property damage and personal injury or death. Fisher equipment must be installed, operated and maintained in accordance with Federal, state and local codes and Fisher instructions. The installation in most States must also comply with NFPA no. 54 and 58 standards. Only Personnel trained in the proper procedures, codes, standards and regulations of the LP-gas industry should install and service this equipment. BUYER AGREES THAT RESPONSIBILITY FOR PROPER SELECTION, INSTALLATION, USE AND MAINTENANCE OF ANY PRODUCT REMAINS SOLELY WITH THE PURCHASER AND END-USER. BUYER AGREES TO COMPLY WITH THE ABOVE WARNING AND ALL INSTRUCTION MANUALS, BULLETINS AND INSTALLATION GUIDES ASSOCIATED WITH THIS PRODUCT.

• Body Sizes and End Connection Styles (inlet x outlet): 1/4-inch x 1/2-inch NPT
• Maximum Allowable Inlet Pressure : 250 psig / 17,2 bar
• Nominal Outlet Setting : 10 psig / 0,69 bar non-adjustable
• Capacity : 1,100,000 BTU/hr
• Vent Size : 3/8 NPT screened