50PCS Helical Threaded Inserts, M10x1.25 Nut Rivet Nut Tool Kit,Stainless Steel M10 Threaded Insert for Parts That Requires Frequent Removing

Specification:Item Type: Thread InsertsMaterial: SUS304Model: M10x1.25Thread Specification: M10x1.25 (mm)Turn Number: 13.3 turnsOutside Diameter Before Installation: Approx. 12 ~ 15.5mm / 0.5 ~ 0.6inDiameter of Drilling Drill Bit for Installation: Approx. 10.3mm / 0.4in1D/1.5D/2D/2.5D/3D:Length After Installation: Approx. 10mm / 0.4in15mm / 0.6in20mm / 0.8in25mm / 1in30mm / 1.2inPackage List：50 x Thread Inserts

• ANTI-LOOSENING INSERTS: M10x1.25 nut can lock the screws into the threaded holes, so that the screws will not loosen when subjected to shock and vibration, which is better than ordinary locking devices
• A CERTAIN ELASTICITY: Because of a certain elasticity, helical threaded inserts can even the load distribution on each thread, eliminate pitch and tooth deviation between screw and screw hole, and absorb vibration, thus increasing the screw thread connection strength and fatigue
• 304 STAINLESS STEEL: 304 stainless steel is not easy to break when repairing threaded holes. The m10 threaded insert size is standard, the thread is clear, and the thread slipping repair is more accurate
• WIDELY USED: Stainless steel helicoil m10x1.25 used in low-strength materials such as aluminum, Mg, can avoid thread damage and get a good connection performance, to enhance connection strength and improve connection condition
• OPTIONAL SIZES: The rivet nut tool kits are available in 5 different sizes, M10 x 1.25 x 1D, M10 x 1.25 x 1.5D, M10 x 1.25 x 2D, M10 x 1.25 x 2.5D, M10 x 1.25 x 3D. Example: M3 x 0.5 x 1.5D, it means that after the screw group is completed, the internal thread is M3, the pitch is 0.5, and the length is 1.5D (the length is 1.5 times the diameter, that is, 1.5 x 3=4.5mm), the length here refers to installed length